AD-TEK CI
Corrosion Inhibiting Admixture – Aqueous Solution
Description
AD-TEK CI is a concrete admixture formulated to give extra service life to concrete structures by protecting the steel reinforcement from corrosion.
AD-TEK CI is a dual action inhibitor, which protects against both anodic and cathodic corrosion.
AD-TEK CI is especially effective against chloride-induced corrosion.
AD-TEK CI exceeds all requirements of Australian Standard 1478.1-2000 as a Special Purpose, Normal Setting Admixture.
MSDS (material safety data sheet) for AD-TEK CI (PDF, opens in a new tab)
Uses
- Bridge decks
- Marine structures
- Parking garages
- Retaining walls
- Industrial plants
- Tunnels
Benefits
- Inhibits both anodic and cathodic corrosion.
- Corrosion inhibition in the presence of varying chloride concentration.
- No changes in concrete mix design required.
- Allows using potential corrosive materials in concrete mix, e.g. beach sand.
- Does not affect the hardened concrete properties.
- Extends the service life of reinforced concrete structures.
Technical Data (typical)
- Appearance: Moderate viscous transparent liquid with amine odour
- Colour: Pale blue
- Density at 20°C: 1.07 kg/litre
- pH value at 20°C: 9-10
- TEA Content: None
- Air entrainment: May slightly increase at high dosage
- Chloride content: None added
Application
AD-TEK CI is best added to the freshly mixed concrete at the batch plant, but may be added to a ready-mix truck at the batch plant or at a building site — the mix water volume being reduced by 50% of the volume of AD-TEK CI added.
AD-TEK CI must never be added to the dry ingredients of a concrete mix. Pre-trial tests are always recommended.
Dosage
Recommended dosage is 2.0–4.0% of cement weight.
Packaging
AD-TEK CI is available in 20-litre and 1000-litre containers, and in bulk.
Storage and Shelf Life
Store at a temperature between 5°C and 40°C. Shelf life in an unopened original container is one year.
Please contact our technical department for further information.
Health and Safety
AD-TEK CI contains no hazardous substances requiring labelling. For further information refer to the Material Safety Data Sheet.
Disclaimer: Any advice, recommendation, information, assistance or service provided by application is in good faith and is believed by AD-TEK PTY LTD to be appropriate and reliable. However, any advice, recommendation, information, assistance or service provided by AD-TEK PTY LTD is provided without liability.