Corrosion Inhibiting Admixture – Aqueous Solution
Description
AD-TEK CNI is a calcium nitrite based admixture for inhibiting the corrosion of steel reinforcement in concrete. The product contains a minimum of 30% calcium nitrite by mass.
AD-TEK CNI is an inhibitor, which protects against anodic corrosion.
AD-TEK CNI is formulated to meet Australian Standard 1478.1-2000 as a Special Purpose Accelerating Admixture.
Uses
- Bridge decks
- Marine structures
- Parking garages
- Retaining walls
- Industrial plants
- Tunnels
- Exposed balconies
Benefits
- Calcium nitrite based formula has been used for many years in the concrete industry.
- Chemically inhibits the corrosion process.
- Reduces the need for additional accelerating admixtures in cold weather.
- Corrosion inhibition in the presence of varying chloride concentration.
- Allows the use of potential corrosive materials in concrete mix, e.g. beach sand.
- Extends the service life of reinforced concrete structures.
- Compatible with other commonly used AD-TEK admixtures.
Technical Data (typical)
- Appearance: Viscous transparent liquid with a specific odour
- Colour: Clear yellow
- Density at 20°C: Approx. 1.3 kg/litre
- pH value at 20°C: 9-11
- TEA Content: None
- Air entrainment: May slightly reduce and a higher dose of air entraining agent may be required
- Chloride content: None added
Dosage
Recommended dose is 10.0–30.0 litres per cubic metre of concrete. The dose rate of AD-TEK CNI is directly related to the level of chloride protection – as given in the following table:
Chloride Protection Limit, Kg/m³ | AD-TEK Dosage, L/m³ |
---|---|
3.6 | 10.0 |
4.8 | 12.5 |
5.9 | 15.0 |
6.9 | 17.5 |
7.8 | 20.0 |
8.6 | 22.5 |
9.4 | 25.0 |
9.5 | 27.5 |
9.6 | 30.0 |
AD-TEK CNI will accelerate concrete setting time at all recommended dosages. To prevent the acceleration, AD-TEK set retarding admixtures may be used, particularly for warm weather concreting. The accelerating effect of AD-TEK CNI may be used in cold weather application.
Application
AD-TEK CNI is best added to the freshly mixed concrete at the batch plant, but may be added to a ready-mix truck at the batch plant or at a building site.
It is necessary to adjust the mix water to account for the water in AD-TEK CNI. Subtract 0.84 litre of water per litre of AD-TEK CNI. Pre-trial tests are always recommended.
Packaging
AD-TEK CNI is available in 20-litre and 1000-litre containers, and in bulk.
Storage and Shelf Life
Store at a temperature between 5°C and 40°C. Shelf life in an unopened original container is one year.
Please contact our technical department for further information.
Health and Safety
AD-TEK CNI contains no hazardous substances requiring labelling. For further information refer to the Material Safety Data Sheet.
Disclaimer: Any advice, recommendation, information, assistance or service provided by application is in good faith and is believed by AD-TEK PTY LTD to be appropriate and reliable. However, any advice, recommendation, information, assistance or service provided by AD-TEK PTY LTD is provided without liability.