AD-TEK HWR-3

AD-TEK HWR-3

Third-Generation High Range Water-Reducing Admixture – Aqueous Solution

Description

AD-TEK HWR-3 is a third generation composite superplasticizer (hyperplasticizer) for high quality concrete, when superior performance is required.

AD-TEK HWR-3 can dramatically reduce mixing water, promoting high early and ultimate strengths of concrete.

AD-TEK HWR-3 provides relatively long slump life with normal settings times.

AD-TEK HWR-3 is in accordance with Australian Standard AS 1478.1 – 2000 as a High Range Water Reducing Admixture.

MSDS

Uses

  • Concrete requiring extremely high water reduction
  • High strength concrete
  • Concrete with the highest requirements on durability and quality
  • Construction sites which need reliable workability concrete
  • Pumped concrete
  • Self compacting concrete
  • Precast concrete

Benefits

  • Extremely high water reduction: in the range of 20-50%, resulting in high early strength
  • High flowability and finishability
  • Super workability without segregation
  • Low permeability, high durability concrete
  • Low shrinkage and creep – reduced risk of cracks
  • Suitable for the production of self compacting concrete

Technical Data (typical)

Property Value
Appearance Moderate viscose liquid
Colour Transparent brown
Density at 20ºC 1.10 kg/litre
pH value Approx. 5.0
Chloride content None added
TEA Content Does not contain
Air entrainment May increase

Dosage

The recommended dose rate is between 300 – 600 ml per 100 kg of cement binder.

For self compacting concrete, the typical dosage is 700ml -1000ml per 100 kg of cement binder.

Site trials are recommended to determine the actual dosage rate.

Application

The maximum plasticizing effect or water reduction is obtained if AD-TEK HWR-3 is added into concrete after cement is wetted out. Thorough mixing is required for complete dispersion throughout the mix.

Packaging, Shelf Life and Storage

AD-TEK HWR-3 is available in 20-litre containers, 1000-litre cubes and in bulk.

AD-TEK HWR-3 should be stored at a temperature between 5ºC and 40ºC.

In an unopened original container, it has a shelf life of one year.

Please contact our technical department for further information.

Health and Safety

AD-TEK HWR-3 contains no hazardous substances requiring labelling. For further information refer to the Material Safety Data Sheet.

Disclaimer: Any advice, recommendation, information, assistance or service provided by application is in good faith and is believed by AD-TEK PTY LTD to be appropriate and reliable. However, any advice, recommendation, information, assistance or service provided by AD-TEK PTY LTD is provided without liability.

Download

We use cookies to improve your experience. Adjust your preferences in our Cookie Policy.

Save preferences