Water-reducer and Set-retarding Admixture – Aqueous Solution
Description
AD-TEK Ligno R is a water reducing admixture based on selected lignosulphonates, which allows concrete production with extended slump life and moderate retardation effect.
AD-TEK Ligno R is used to produce medium performance concrete, where water reduction with ease of placing and workability are required.
AD-TEK Ligno R exceeds all requirements of Australian Standard AS1478.1 – 2000 as a Water Reducing and Set Retarding Admixture.
Benefits
- Higher slump without further water addition
- Increased workability time in hot weather
- Reduced rate of bleeding
- Reduced segregation of concrete mixes
- Increased strength and long-term durability properties
- Easy pumping, placing and burnish finish
- Increased resistance to aggressive atmospheric conditions
- Decreased risk of shrinkage and creep
Technical Data (typical)
| Property | Value |
|---|---|
| Appearance | Aqueous solution |
| Colour | Brown |
| Density at 20ºC | 1.18 kg/litre |
| pH value | 5-7 |
| Chloride content | None added |
| Air entrainment | May slightly increase |
| TEA content | None |
Application
The maximum plasticizing effect or water reduction is obtained if AD-TEK Ligno R is added into concrete after the cement is wetted out.
Dosage
The recommended dose rate is between 200-400 ml per 100 kg of cement binder depending on specific mix design and requirements. Site trials are recommended to determine the actual dosage rate.
Packaging
AD-TEK Ligno R is available in 20-litre containers, 1000-litre cubes and in bulk.
Health and Safety
AD-TEK Ligno R contains no hazardous substances requiring labelling. For further information refer to the Material Safety Data Sheet.
Please contact our technical department for further information.
Storage and Shelf Life
One year when stored in an unopened original container at between 5ºC and 40ºC.
Disclaimer: Any advice, recommendation, information, assistance or service provided by application is in good faith and is believed by AD-TEK PTY LTD to be appropriate and reliable. However, any advice, recommendation, information, assistance or service provided by AD-TEK PTY LTD is provided without liability.